Headlight Adjustment
WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust the tire air pressure to the specification.
- Position the unloaded vehicle on a flat, level surface.
- Seat one person in the driver's seat.
- Position the vehicle straight ahead and perpendicularly to a wall.
- Set the headlights 3 m {10 ft} from the wall.
- While adjusting one headlight, disconnect the connector of the other.
- Start the engine to charge the battery.
- Adjust the headlights by turning the adjusting screws as shown in the illustration. Loosen the screws first, then tighten them.
NOTE:
- If the adjusting screws are tightened first, then loosened, they will continue to loosen when the vehicle is in motion and may cause the headlights to become misaligned.