Front Fog Light Adjustment

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the tire air pressure to the specification.
Position the unloaded vehicle on a flat, level surface.
Seat one person in the driver's seat.
Position the vehicle 3 m {10 ft} in front of a white screen.

Fig 1: Positioning Vehicle In Front Of White Screen
Courtesy of MAZDA MOTORS CORP.
While adjusting one fog light, mask the other.
Start the engine to charge the battery.
Turn the front fog light on.
Adjust the front fog light by turning the adjusting screws as shown in the Fig 2 . Loosen the screws first, then tighten them.

NOTE:

If the adjusting screws are tightened first, then loosened, they will continue to loosen when the vehicle is in motion and may cause the front fog lights to become misaligned.

Fig 2: Adjusting Front Fog Light By Turning Adjusting Screws

Courtesy of MAZDA MOTORS CORP.