Power Outside Mirror Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the inner garnish.
Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
Partially peel off the door screen.
Disconnect the connector.
Remove the nuts, and then remove the power outside mirror.
Install in the reverse order of removal.

Fig 1: Removing Power Outside Mirror - With Torque Specifications
Courtesy of MAZDA MOTORS CORP.