Trunk Compartment Light Switch Inspection [4SD]

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk lid trim.
Disconnect the trunk compartment light switch connector.
Inspect for continuity between the trunk compartment light switch terminals using an ohmmeter.
- If not as specified, replace the trunk lid lock.

Fig 1: Trunk Compartment Light Switch Terminals Continuity Table

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Trunk Compartment Light Switch Terminals

Courtesy of MAZDA MOTORS CORP.