LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Seats) >> Seat Warmer Switch Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Seat Warmer Switch Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper panel. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Removing/Installation Seat Warmer Switch
    G01344372Courtesy of MAZDA MOTORS CORP.
  4. Squeeze the tabs of seat warmer switch and pull it outward to remove it.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals