Trunk Compartment Light Switch Inspection [Sedan]

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION [SEDAN] .)
Disconnect the trunk compartment light switch connector.
Inspect for continuity between the trunk compartment light switch terminals using an ohmmeter.
- If not as specified, replace the trunk lid lock.
  
  Fig 1: Trunk Compartment Light Switch Continuity Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Trunk Compartment Light Switch Circuit Diagram And Connector Terminals
  Courtesy of MAZDA MOTORS CORP.