Power Window SUBSWITCH Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Verify continuity as indicated in the table.
- If not as indicated in the table, replace the power window subswitch.
Fig 1: Verifying Continuity Of Power Window Subswitch
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Power Window Subswitch Connector Terminal
Courtesy of MAZDA MOTORS CORP.
Connect battery positive voltage to terminal E and ground to the terminal A. Verify that continuity exists.
- If not as specified, replace the power window subswitch.
Connect battery positive voltage to terminal E and ground to the terminal B. Verify that continuity exists.
- If not as specified, replace the power window subswitch.