Slide Motor Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the slide motor connector.

Connect battery positive voltage to slide motor terminal A or B, then verify that the slide motor operate as shown in the table.

If the slide motor does not operate as indicated in the table, replace the slide motor.

Motor operation	Connection
Motor operation	B+	GND
Forward	B	A
Backward	A	B

Fig 1: Connecting Battery Positive Voltage To Slide Motor Terminal

Courtesy of MAZDA MOTORS CORP.