Refrigerant Lines Installation Note
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Apply compressor oil to the O-rings and connect the joints.
- When installing a new cooler hose or pipe add DENSO OIL8 compressor oil into the refrigeration cycle.
Supplemental amount (approx.quantity)
- 10 ml {10 cc, 0.3 fl oz}
- Tighten the joints.
- Tighten the nut or bolt of the joint by hand.
- Tighten the joint to the specified torque.
- If it is a nut joint, tighten the nut using a spanner and torque wrench.