Deployment Procedures for Inside of Vehicle: Notes
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the SST (Deployment Tool). (See INSPECTION OF SST (DEPLOYMENT TOOL) .)
- Move the vehicle to an open space, away from strong winds, and close all of the vehicle's doors and windows.
- Turn the ignition switch to LOCK position.
- Disconnect the negative battery cable and wait for more than 1 minute to allow the backup power supply of the SAS control module to deplete its stored power.