Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Bearing Preload | |||
| Differential | |||
| Torque Wrench | 27-35 INCH Lbs. (3.0-3.9 N.m) | ||
| Pull Scale | 6.6-8.8 Lbs. (3.0-4.0 kg) | ||
| Output Gear | |||
| Torque Wrench | 7.9-17.7 INCH Lbs. (0.9-2.0 N.m) | ||
| Pull Scale | 2.0-4.6 Lbs. (0.9-2.1 kg) | ||
| Brake Snap Ring-To-Retaining Plate Clearance, Low-Reverse Brake | .059-.071" (1.50-1.80 mm) | ||
| Clutch Drive Plate Minimum Thickness (All Clutches) | .055" (1.40 mm) | ||
| Clutch Snap Ring-To-Retaining Plate Clearance | |||
| Coasting Clutch | .039-.047" (1.00-1.20 mm) | ||
| Forward Clutch | .039-.047" (1.00-1.20 mm) | ||
| Reverse Clutch | .059-.071" (1.50-1.80 mm) | ||
| 3-4 Clutch | .051-.059" (1.30-1.50 mm) | ||
| Oil Pump | |||
| Rotor End Clearance | .0008-.0016" (.020-.040 mm) | ||
| Rotor Side Clearance | .0016-.0045" (.040-.115 mm) | ||
| Seal Ring Inner Diameter | 2.026" (51.45 mm) | ||
| Planetary Pinion Gear Clearance | .008-.028" (.20-.70 mm) | ||
| Torque Converter Bushing Inside Diameter (Maximum) | 2.088" (53.03 mm) | ||