LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV DX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> 2-3 Accumulator Assembly >> Assembly Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Assembly Procedure

  1. Apply ATF to the large and small seal ring.
  2. Install the large and small seal ring to the 2-3 accumulator piston.
  3. Apply ATF to a new O-ring and install it onto the stopper plug.

    O-ring inner diameter 26.8 mm {1.06 in} 

    CAUTION:
    • Apply even pressure to the perimeter of the accumulator pistons and the stops to avoid damaging the O-ring and seal rings while installing.
  4. Install the accumulator piston and 2-3 accumulator spring.
  5. Install the stopper plug and snap ring while holding in the stopper plug.
scientia non olet · About LEMON Manuals