Mini ISO Relay: Testing and Inspection

RELAY INSPECTION

Relay Type:

Relay Type

Four-terminal

Type A
1. Remove the relay.

Type A:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type B
1. Remove the relay.

Type B:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type C
1. Remove the relay from the relay box.

Type C:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type D
1. Remove the relay.

Type D:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type E
1. Remove the relay.

Type E:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type F
1. Remove the relay.

Type F:

2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Five-terminal
1. Remove the relay.




2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.