October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Cylinder Block Assembly

Cylinder Block Distortion	Maximum		0.08 Millimeter (mm)
Cylinder Bore Diameter Measure the Cylinder Bore at 50 mm Below the Top Surface	Standard	Grade 1	81.640 - 81.650 Millimeter (mm)
		Grade 2	81.651 - 81.660 Millimeter (mm)
		Grade 3	81.661 - 81.670 Millimeter (mm)
Taper	Maximum		0.006 Millimeter (mm)
Out of Round	Maximum		0.020 Millimeter (mm)