Cruise Control Main Switch

Disconnect cruise control main switch harness connector. Check continuity between specified terminals of cruise control main switch with switch in specified position. See CRUISE CONTROL MAIN SWITCH CONTINUITY TEST table. See Fig 1. If continuity is not as specified, replace cruise control main switch.

CRUISE CONTROL MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

Off

⁽¹⁾ A & B

A & B; C, D & F

⁽¹⁾	Apply battery voltage across terminals "A" and "B" to test switch back-lighting or terminals "C" and "F" to test indicator light.

Fig 1: Cruise Control Main Switch Terminals

Courtesy of MAZDA MOTORS CORP.