DTC P0705: Neutral Switch Input Circuit Malfunction: Condition

DTC is set when Powertrain Control Module (PCM) has not received a voltage change from neutral switch when gears are engaged 14 times or more and vehicle speed is 18.6 MPH or more. This is a continuous monitor. MIL is illuminated when Powertrain Control Module (PCM) detects malfunction during 2 consecutive drive cycles. Possible causes are:

• Neutral switch malfunction.
• Open or short in wiring between neutral switch and PCM.
• Open or short in wiring between neutral switch and ground.
• PCM malfunction.