On-Board Diagnostic - Blind Spot Monitoring (BSM) Control Module

• On-Board Diagnostic Wiring Diagram [Blind Spot Monitoring (BSM) Control Module]
• Foreword [Blind Spot Monitoring (BSM) Control Module]
  • Notes
  • Troubleshooting Procedure
  • Action for Non-repeatable Malfunction
• DTC Test [Blind Spot Monitoring (BSM) Control Module]
  • CMDTC Self Test
  • ODDTC Self Test
  • Snapshot Data
• Clearing DTC [Blind Spot Monitoring (BSM) Control Module]
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC Table [Blind Spot Monitoring (BSM) Control Module]
• DTC B11CB-11: Blind Spot Monitoring Warning Light Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B11CB-15: Blind Spot Monitoring Warning Light Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B11D3-11: Blind Spot Monitoring Warning Light Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B11D3-15: Blind Spot Monitoring Warning Light Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B11F2-23: Blind Spot Monitoring Switch Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U0001-88; U0100-00; U0121-00; U0155-00; U0214-00: Communication Error
  • Notes
  • Diagnostic Procedure
• DTC U0028-87: Blind Spot Monitoring Control Module And Communication Error
  • Notes
  • Diagnostic Procedure
• DTC U0401-68: Error Signal Received From Pcm
  • Notes
  • Diagnostic Procedure
• DTC U0415-68: Error Signal Received From DSC HU/Cm
  • Notes
  • Diagnostic Procedure
• DTC U0423-68: Error Signal Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U0515-68: Error Signal Received From Start Stop Unit
  • Notes
  • Diagnostic Procedure
• DTC U1A4B-16: Blind Spot Monitoring Control Module Low Power Supply Voltage Input
  • Notes
  • Diagnostic Procedure
• DTC U1A4B-17: Blind Spot Monitoring Control Module High Power Supply Voltage Input
  • Notes
  • Diagnostic Procedure
• DTC U1A4B-43; U1A4B-44; U1A4B-45; U1A4B-46; U1A4B-47; U1A4B-48; U1A4B-49; U1A4B-96: Blind Spot Monitoring Control Module Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U1A4B-54: Radar Aiming Is Not Performed Or Radar Sensor Axis Is Deviated Control Module
  • Notes
  • Diagnostic Procedure
• DTC U1A4B-97: Radar Sensor
  • Notes
  • Diagnostic Procedure
• DTC U2300-54: Configuration Data Not Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-55: Instrument Cluster Configuration Not Implemented
  • Notes
  • Diagnostic Procedure
• DTC U2300-56: Configuration Data Unmatched With Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-64: Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3000-42; U3000-43; U3000-44; U3000-45; U3000-46; U3000-47; U3000-48; U3000-49; U3000-96: Blind Spot Monitoring Control Module Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3000-4B: Blind Spot Monitoring Control Module
  • Notes
  • Diagnostic Procedure
• DTC U3000-54: Radar Sensor Axis Is Deviated
  • Notes
  • Diagnostic Procedure
• DTC U3000-97: Radar Sensor Sensitivity
  • Notes
  • Diagnostic Procedure
• DTC U3003-16: Blind Spot Monitoring Control Module Low Power Supply Voltage Input
  • Notes
  • Diagnostic Procedure
• DTC U3003-17: Blind Spot Monitoring Control Module
  • Notes
  • Diagnostic Procedure
• PID/Data Monitor Test [Blind Spot Monitoring (BSM) Control Module]
• PID/Data Monitor Table [Blind Spot Monitoring (BSM) Control Module]
• Active Command Modes Inspection [Blind Spot Monitoring (BSM) Control Module]
• Active Command Modes Table [Blind Spot Monitoring (BSM) Control Module]