DTC U1A4B-54: Radar Aiming Is Not Performed Or Radar Sensor Axis Is Deviated Control Module: Notes
CAUTION:
- When replacing a blind spot monitoring (BSM) control module (RH) having any of the following part numbers, it is necessary to replace the blind spot monitoring (BSM) control module (LH) at the same time to perform the configuration normally.
- N243-67Y80 A
- N243-67Y80 B
- N243-67Y80 C
| Description | Radar aiming is not performed or radar sensor axis is deviated (blind spot monitoring (BSM) control module (RH)) |
|---|---|
| Detection condition |
|
| Fail-safe |
|
| Possible cause |
|
| System wiring diagram | Not applicable |