LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transaxle - Overhaul [C66M-R]) >> Primary Shaft Component Assembly >> Synchronizer Ring Assembly Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Synchronizer Ring Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the projection of the synchronizer ring with the key groove of the clutch hub as shown in the figure, and assemble the synchronizer ring.
    Fig 1: Aligning Projection Of Synchronizer Ring With Key Groove Of Clutch Hub
    G08347863
scientia non olet · About LEMON Manuals