LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-3 Sport, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Dynamic Stability Control System (Service Information)) >> DSC HU/Control Module Removal/Installation >> DSC HU/Control Module Connector Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/Control Module Connector Installation Note

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the connector and pull the lock lever up in the direction of the arrow.
    Fig 1: Connecting Lock Lever Of DSC HU/Control Module Connector
    G11433113Courtesy of MAZDA MOTORS CORP.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
scientia non olet · About LEMON Manuals