April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bolt And Nuts Installation Note

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Install the bolt and nuts in the order shown in the figure.

Fig 1: DSC HU/Control Module Unit Bolts And Nuts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.

Tightening torque

19-25 N-m {2.0-2.5 kgf.m, 15-18 ft.lbf}