Auto wiper system (Using M-MDS)

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.

Select an item name, and then select option.

M-MDS Display

Function

Initial Setting

Setting Contents

Control Unit

Rain Sensing Wipers.

The auto wiper function can be disabled.

On (Rain Sensing)

Off ⁽¹⁾ (Intermittent)/On (Rain Sensing)

Rear body control module (RBCM)

⁽¹⁾	If the function is set to "Off", the wipers will operate intermittently with the wiper switch in AUTO position.