LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-3 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Intake-Air System) >> Intake-air System Removal/Installation >> Intake Manifold Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Manifold Removal Note

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the wiring harness clip from the intake manifold shown in the figure below.
    Fig 1: Wiring Harness Clip Installation Position
    G12184242Courtesy of MAZDA MOTORS CORP.
  2. Remove the intake manifold.
scientia non olet · About LEMON Manuals