LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-5 Sport, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System >> Intake-air System Removal/Installation >> Intake Manifold Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Manifold Installation Note

  1. Install the intake manifold.
  2. Connect the wiring harness clip to the intake manifold shown in the figure below.
    Fig 1: Wiring Harness Clip Installation Position
    G12184242Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals