LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-5 Sport, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System >> Intake-air System Removal/Installation >> Intake Manifold Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Manifold Removal Note

  1. Disconnect the wiring harness clip from the intake manifold shown in the figure below.
    Fig 1: Wiring Harness Clip Installation Position
    G12184242Courtesy of MAZDA MOTORS CORP.
  2. Remove the intake manifold.
scientia non olet · About LEMON Manuals