LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> High Pressure Fuel Pump Removal/Installation >> Protector Installation Note
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Protector Installation Note

  1. Install the protector.
    Fig 1: Protector Bolts
    G11436397Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    A: 8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}

    B: 20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}

  2. Install the ground cable to the protector.
    Fig 2: Protector Ground Cable And Bolt
    G11436393Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}

  3. Install the clip to the protector.
    Fig 3: Protector Clip
    G11436392Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals