September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Rear Power Window Regulator Installation Note
- The rear power window regulator installation work can be facilitated by performing the following procedure:
- Temporarily tighten the nut shown in the figure.
 Courtesy of MAZDA MOTORS CORP.
|
- Insert the rear power window regulator from the service hole cover No. 2 installation hole.
 Courtesy of MAZDA MOTORS CORP.
|
- Hook the temporarily tightened nuts to the rear door panel.
 Courtesy of MAZDA MOTORS CORP.
|