September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Indicator Unit Removal/Installation
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US)
.)
- Remove the sensor cover. (See SENSOR COVER REMOVAL/INSTALLATION
.)
- Disconnect the connector.
 Courtesy of MAZDA MOTORS CORP.
|
- Move the indicator unit in the direction of the arrow shown in the figure and remove it from the sensor cover C.
- Remove the screw.
 Courtesy of MAZDA MOTORS CORP.
|
- Remove the indicator unit short-cord.
- Install in the reverse order of removal.