LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transaxle (Service Information) (GW6AX-El)) >> Initial Learning >> Initial Learning Procedure >> Preparation before servicing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation before servicing

WARNING: This page is about a different variant/trim than selected.
  1. Verify initial learning implementation necessity for replacement parts.
    Replacement part Initial learning implementation necessity
    Control valve body replacement Necessary
    Oil pressure switch replacement Necessary
    Clutches (1) Necessary
    Automatic transaxle replacement Necessary
    On/OFF solenoid replacement Unnecessary
    Coupler component replacement Unnecessary
    (1) Low clutch, high clutch, R-3-5 brake, 2-6 brake, and low and reverse brake
  2. Apply the parking brake firmly, and set the wheel blocks for both the front and rear wheels.
  3. Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION .)