Commander switch inspection
CENTER DISPLAY INFORMATION
| Inspection |
Display of center display (Diagnostic result) |
Action |
- Launch the switch inspection mode.
- Operate each button and knob of the commander switch.
- Does the display in the center display correspond to each operation?
|
- Home Button Pressed: HOME button is pressed
- Home Button Released: HOME button is released
- Navi Button Pressed: NAV button is pressed
- Navi Button Released: NAV button is released
- Audio Button Pressed: AUDIO button is pressed
- Audio Button Released: AUDIO button is released
- Favorites Button Pressed: FAVORITE button is pressed
- Favorites Button Released: FAVORITE button is released
- Back Button Pressed: BACK button is pressed
- Back Button Released: BACK button is released
- Commander Pushed In: Commander knob is pressed
- Commander Released: Commander knob is released
- Tilt Up Pressed: Commander knob is tilted up
- Tilt Up Released: Commander knob is released from tilted up condition
- Tilt Right Pressed: Commander knob is tilted to the right
- Tilt Right Released: Commander knob is released from tilted right condition
- Tilt Down Pressed: Commander knob is tilted down
- Tilt Down Released: Commander knob is released from tilted down condition
- Tilt Left Pressed: Commander knob is tilted to the left
- Tilt Left Released: Commander knob is released from tilted left condition
- Commander Turned Clockwise: Commander knob is turned clockwise
- Commander Turned Counter Clockwise: Commander knob is turned counterclockwise
- Volume Knob Pushed In: Volume dial is pressed
- Volume Knob Released: Volume dial is released
- Volume Knob Turned Clockwise: Volume dial is turned clockwise
- Volume Knob Turned Counter Clockwise: Volume dial is turned counterclockwise
|
Yes |
Commander switch is normal. |
| No |
Replace the commander switch.
(See COMMANDER SWITCH REMOVAL/INSTALLATION
.) |
- Cancel the diagnostic assist function according to the ending procedure. (See ENDING PROCEDURE .)