Step 1

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the SST (49 G019 0A0) to the SST (49 0107 680A).
Bolt used

Part No.: 9YA02 A220 or M12x1.75 length 40 mm {1.6 in}

Tightening torque

88-118 N.m {9.0-12 kgf.m, 65-87 ft.lbf}

Fig 1: Identifying SST (49 G019 0A0) And SST (49 0107 680A)
Assemble the MTX to the SST.
Bolt A

Part No.: 99450 1055 or M10x1.25 length 55 mm {2.2 in}, and nut (M10x1.25)

Bolt A tightening torque

38-52 N.m {3.9-5.3 kgf.m 29-38 ft.lbf}

Bolt B

SST (49 G019 033 part of 49 G019 0A0)

Bolt B tightening torque

88-118 N.m {9.0-12 kgf.m 65-87 ft.lbf}

Bolt C

Part No.: 9YA02 1080 or M10x1.5 length 55 mm {2.2 in}

Bolt C tightening torque

38-52 N.m {3.9-5.3 kgf.m 29-38 ft.lbf}

Bolt D

Part No.: 99450 1030 or M10 1.25 length 30 mm {2.2 in}

Bolt D tightening torque

38-52 N.m {3.9-5.3 kgf.m 29-38 ft.lbf}

Fig 2: Assemble MTX To SST
Remove the parts around the MTX using the procedure shown in the figure.

Fig 3: Identifying MTX Components