TCS Off Switch Inspection [Without Off-Road Traction Assist]: Notes
NOTE:
- The TCS OFF switch is integrated with the cluster switch No..
- For the TCS OFF switch removal/installation, refer to CLUSTER SWITCH REMOVAL/INSTALLATION. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Disconnect the cluster switch No. connector. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
- Attach the tester lead to the cluster switch No. wiring harness-side connector and inspect voltage or continuity according to the Terminal Voltage Table (Reference) on the table.
- If not as specified, repair or replace the related wiring harness.
- If as specified, replace the cluster switch No..(See CLUSTER SWITCH REMOVAL/INSTALLATION .)