Power Window Motor Inspection: Rear
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
- Disconnect the power window motor connector.
- Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.
- If the power window motor does not operate as indicated in the chart, replace it.
| Operation | Terminal | |
|---|---|---|
| E | F | |
| Close | B+ | Ground |
| Open | Ground | B+ |