DTC U2300-54: Configuration Data Not Received From Instrument Cluster [Blind Spot Monitoring (BSM) Control Module]: Notes

DTC U2300:54 CONFIGURATION DATA NOT RECEIVED FROM INSTRUMENT CLUSTER [BLIND SPOT MONITORING (BSM) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

Description	Configuration data not received from instrument cluster
Detection condition	Blind spot monitoring (BSM) control module cannot receive the configuration signal it is supposed to receive.
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	NOTE: To correctly write the configuration data sent from the instrument cluster to the blind spot monitoring (BSM) control module to the blind spot monitoring (BSM) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). DTCs are stored in the instrument cluster. Instrument cluster configuration not implemented Instrument cluster internal memory malfunction Blind spot monitoring (BSM) control module malfunction
System wiring diagram	Not applicable