LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module REMOVAL/INSTALLATION >> Bolt and Nuts Installation Note
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Bolt and Nuts Installation Note

  1. Install the bolt and nuts in the order shown in the figure.
    Fig 1: DSC HU/Control Module Bolt And Nuts Tightening Sequence
    G11433111Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    19-25 N.m {2.0-2.5 kgf.m, 15-18 ft.lbf}