Rear Wheel Alignment: Notes
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
REAR WHEEL ALIGNMENT SPECIFICATION (UNLOADED CONDITION)
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire [Tolerance ±4 {0.2}] | (mm) | 3.0 {0.12} |
| Rim inner [Tolerance ±2.8 {0.11}] | Vehicle equipped with 16 inch wheel: 2.0 {0.079} Vehicle equipped with 17 inch wheel: 2.1 {0.083} |
||
| degree | 0°17'±20' | ||
| Camber [Tolerance ±1° |
Vehicle height: From the end of the rear fender to the center of the wheel (mm) | 350-358 {13.8-14.0} | -1°23' |
| 359-367 {14.2-14.4} | -1°09' | ||
| 368-376 {14.5-14.8} | -0°57' | ||
| 377-385 {14.9-15.1} | -0°46' | ||
| 386-394 {15.2-15.5} | -0°37' | ||
NOTE:
- Unloaded condition: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle must be within 1°.