Prerequisites For Testing The Alternator - AR15.40-S-5009E

Model 447 with engine 274, 622, 651, 654 

Model 448 with engine 274 

Model 900 with engine 651 

Model 906 with engine 271, 272, 642, 651.9 

Model 907 with engine 274, 642, 651, 654 

Model 910 with engine 651, 654 

	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	Risk of injury  . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Remove
1.1	Remove lower engine compartment lining.	Models 447, 448, models 907, 910 with code XM1 (noise abatement measures) Model 447, 448	AR61.20-S-1105E
		Model 907, 910 with code XM1 (Noise abatement measures)	AR61.20-D-1105TS
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1.2	Raise vehicle.	Models 900, 906, models 907, 910 except code XM1 (noise abatement measures)
Notice	Special instructions for lifting and supporting vehicle	Model 907, 910	AH00.60-P-0100-01TS
		Model 900, 906	AR00.60-D-1000H
		Models 907, 910 except code XM1 (noise abatement measures)	AR00.60-D-1000-04TS
	000 588 26 80 00 Adapter	Models 907, 910	WS00.00-Z-0067KOB
	000 588 41 80 00 Adapter	Models 907, 910	WS00.00-P-0321B
	000 588 27 80 00 Adapter	Models 907, 910	WS00.00-P-0068B
	Check
2	Check whether electric lines of circuit 30 are fitted tightly and are in perfect condition.	Check following positions: Battery positive line on battery, Positive line on fuse box, Positive line on starter, Positive line on alternator. If there is a problem, ↓ repair circuit 30 electric lines and fasten.
3	Check whether electric lines of circuit 31 are fitted tightly and are in perfect condition.	Check following positions: Battery ground line to battery Ground line from the transmission to the body. If there is a problem, ↓ repair circuit 31 electric lines and fasten.
4	Check condition of poly-V-belt.
		Model 900 with engine 651 Model 906 with engine 271.951, 272.979, 642.89/99, 651.9	AP13.22-D-1351H
		Model 447 with engine 654.9	AR13.22-S-1351EA
		Model 447 with engine 274, 622, 651 Model 448 with engine 274 Model 907 with engine 274	AR13.22-S-1351E
		Model 907 with engine 642 Model 907, 910 with engine 651 Model 907.1/2/6/7 with engine 654.9	AR13.22-D-1351TSR
		Model 910 with engine 654.9	AR13.22-D-1351TSK
5	Start engine.
6	Check charge indicator in instrument cluster.	In case of correct charging voltage, no fault message is shown in the display on the instrument cluster. If a fault message appears, ↓ determine the cause and perform suitable repair measures.
7	Switch off engine.
	Install
8.1	Attach lower engine compartment lining.	Models 447, 448, models 907, 910 with code XM1 (noise abatement measures) Model 447, 448	AR61.20-S-1105E
		Model 907, 910 with code XM1 (Noise abatement measures)	AR61.20-D-1105TS
8.2	Lower vehicle.	Models 900, 906, models 907, 910 except code XM1 (noise abatement measures)