LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Engine Cooling System) >> Coolant Level Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Coolant Level Sensor: Removal

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Risk of injury to skin and eyes due to scalding from hot coolant. Do not open the cooling system unless the temperature is below 194°F (90°c). Wear protective clothing and eye wear. Risk of poisoning if coolant is swallowed. Store coolant in proper and appropriately marked containers.
NOTE: Drain coolant from radiator drain plug only.
  1. Drain coolant until the coolant reservoir is emptied.
  2. Disconnect the wiring harness electrical connector.
  3. Turn the level sensor 90 degrees clockwise, lift up and out of the container (Figure).