LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1987 >> Precis Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Manual Transaxle Overhaul - Lancer Evolution) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> C << 1ST-2ND Speed Synchronizer Hub Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << 1ST-2ND Speed Synchronizer Hub Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 1st-2nd speed synchronizer hub in the illustrated direction.
    Fig 1: Identifying 1st-2nd Speed Synchronizer Hub In Illustrated Direction
    G05394003Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using the special tools, MD998812, MD998814 and MD998824, indicated below, install the 1st-2nd speed synchronizer hub.
    Fig 2: Identifying Special Tools (MD998812, MD998814 And MD998824)
    G05394004Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals