<< E >> Needle Roller Bearing / Synchronizer Cone / Synchronizer Outer Ring / Synchronizer Inner Ring / Thrust Bearing / 2ND Speed Gear Sleeve / 1ST-2ND Speed Synchronizer Hub / 1ST Speed Gear / 1ST Speed Gear Sleeve Removal
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Using special tool, MD998917, support the 1st speed gear sleeve, and then remove the 2nd speed gear sleeve, 1st-2nd speed synchronizer hub, synchronizer cones, synchronizer outer rings, synchronizer inner rings, thrust bearings, 1st speed gear, needle roller bearing and 1st speed gear sleeve.