LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Eclipse Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Cruise Control System) >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Scan Tool Diagnostic Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Diagnostic Mode

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect scan tool to Data Link Connector (DLC). DLC is located under center of dash, right of steering column. Turn ignition switch to ON position. Enter SPEED CONTROL MENU. To enter SPEED CONTROL MENU, see SCAN TOOL TEST FUNCTIONS.
  2. At SPEED CONTROL MENU, press "2" (READ TROUBLE CODES) key. Press ENTER key. After trouble codes are accessed, refer to TEST TC-1A  under SELF-DIAGNOSTIC TESTS to diagnose problem. If no trouble codes are present, see TROUBLE SHOOTING  .
  3. To erase trouble codes while in this option, press ATM key. At scan tool display, press "2" (ERASE) key. Scan tool will display ERASE TROUBLE CODES ARE YOU SURE? (ENTER TO ERASE). Press ENTER key.
  4. When scan tool is finished erasing trouble codes, it will display TROUBLE CODES ERASED. This display will remain until ATM key is pressed. After ATM key is pressed, display will return to SPEED CONTROL MENU screen.
scientia non olet · About LEMON Manuals