Cruise Control Switches
WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Access cruise control switches. Disconnect both cruise control switch 2-pin connectors. Using an ohmmeter, check both cruise control switches. If either cruise control switch does not test as specified, replace defective switch. See CRUISE CONTROL SWITCHES . Also, see CONNECTOR IDENTIFICATION .
CRUISE CONTROL SWITCHES
| Switch Position | Check Between | Ohms | |||
|---|---|---|---|---|---|
| ON/CRUISE/OFF Switch | |||||
| (1) | 1 & 2 | 22,351-22,848 | |||
| OFF | 1 & 2 | 0-.5 | |||
| ON | 1 & 2 | 644-668 | |||
| SET/RESUME Switch | |||||
| (1) | 1 & 2 | No Continuity | |||
| RES/ACCEL | 1 & 2 | 5558-5682 | |||
| SET/COAST | 1 & 2 | 1978-2022 | |||
|
|||||