LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2002 >> Lancer LS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Multiplex Control Systems >> On-Vehicle Service >> Adjustment Procedures Of SWS Function (Vehicles With Keyless Entry System) >> Entry Conditions For Adjustment Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Entry Conditions For Adjustment Mode

  1. Set switches to the following conditions:
    • Hazard warning light switch: OFF
    • Diagnosis control: ON (Connect scan tool MB991502 to the data link connector, or connect the data link connector terminal No. 1 to ground.)
    • Key reminder switch: OFF (insert the ignition key)
    • Ignition switch: "LOCK" (OFF)
    • Driver's door switch: OFF (driver's door closed)
  2. If the windshield washer switch remains on for 10 seconds or more, the tone alarm incorporated in the ETACS-ECU sounds once, and then enter the adjustment mode.