DTC P0121: Throttle Position Sensor Circuit Range/Performance Problem: Operation
A 5-volt power supply is applied on the TP sensor power terminal (terminal No. 3) from the ECM (terminal No. 81 - M/T) or PCM (terminal No. 46 - A/T). The ground terminal (terminal No. 2) is grounded with ECM (terminal No. 92 - M/T) or PCM (terminal No. 57 - A/T). When the throttle valve shaft is turned from idle position to fully opened position, the resistor between the TP sensor output terminal (terminal No. 1) and ground terminal will increase according to the rotation.