LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Endeavor LS, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Chassis Electrical >> Combination Meter Assembly & Vehicle Speed Sensor >> Combination Meters Assembly And Vehicle Speed Sensor Diagnosis >> Actuator Test Reference Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Actuator Test Reference Table

ACTUATOR TEST REFERENCE

ITEM No. CHECK ITEM TEST CONTENT CHECK CONDITION NORMAL CONDITION
80 Speedometer Set the speedometer to 0 km/h, (0 mph) Turn the ignition switch to the "ON" position. Speedometer shows 0 km/h, (0 mph)
81 Set the speedometer to 40 km/h, (24.9 mph) Speedometer shows 40 km/h, (24.9 mph)
82 Set the speedometer to 100 km/h, (62.1 mph) Speedometer shows 100 km/h, (62.1 mph)
84 Tachometer Set the tachometer to 0 r/min Turn the ignition switch to the "ON" position. Tachometer shows 0 r/min
85 Set the tachometer to 2,000 r/min Tachometer shows 2,000 r/min
86 Set the tachometer to 5,000 r/min Tachometer shows 5,000 r/min
88 Engine coolant temperature gauge Set the engine coolant temperature gauge to 0°C (32°F) Turn the ignition switch to the "ON" position. Engine coolant temperature gauge shows 0°C (32°F)
89 Set the engine coolant temperature gauge to 85°C (185°F) Engine coolant temperature gauge shows 85°C (185°F)
8A Set the engine coolant temperature gauge to 126°C (259°F) Engine coolant temperature gauge shows 126°C (259°F)
8C Fuel gauge Set the fuel gauge to 0 % Turn the ignition switch to the "ON" position. Fuel gauge shows 0 %
8D Set the fuel gauge to 50 % Fuel gauge shows 50 %
8E Set the fuel gauge to 100 % Fuel gauge shows 100 %
90 Fuel gauge (Target) Set the fuel gauge to 0 % Turn the ignition switch to the "ON" position. Fuel gauge shows 0 %
91 Set the fuel gauge to 50 % Fuel gauge shows 50 %
92 Set the fuel gauge to 100 % Fuel gauge shows 100 %
A0 Rheostat Set the rheostat to 0 % Turn the ignition switch to the "ON" position. Rheostat is 0 %
A1 Set the rheostat to 50 % Rheostat is 50 %
A2 Set the rheostat to 100 % Rheostat is 100 %
A3 Indicator light 1 Illuminate the indicator lights and the warning lights. Turn the ignition switch to the "ON" position. The turn-signal lights, the door indicator lights, the front fog lights, the high-beam indicator lights, the brake warning light, the high coolant temperature warning light, the active stability control indicator light, the CHECK ENGINE warning light, the charge warning light, the oil pressure indicator light, the SRS, the ABS, the seat belt and the fuel warning light illuminate.
A4 Extinguish the indicator lights and the warning lights. The turn-signal lights, the door indicator lights, the front fog lights, the high-beam indicator lights, the brake warning light, the high coolant temperature warning light, the active stability control indicator light, the CHECK ENGINE warning light, the charge warning light, the oil pressure indicator light, the SRS, the ABS, the seat belt and the fuel warning light do not illuminate.
A9 A/T position indicator Illuminate the A/T position indicator. Turn the ignition switch to the "ON" position. The A/T position indicator and the driving program display code (upper or lower arrow) illuminate.
AA Extinguish the A/T position indicator. The A/T position indicator and the driving program display code (upper or lower arrow) do not illuminate.