LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Galant ES >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Controller Area Network (Can) >> Can Communication-Related DTC Code (U Code) Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Can Communication-Related DTC Code (U Code) Table

CAN COMMUNICATION-RELATED DTC CODE (U CODE)

OUTPUT ECU CODE NO. DIAGNOSTIC ITEM ACTION
Power train control module U1073 Bus Off CAN main bus line diagnostics
U1102 ABS-ECU time-out
U1108 Combination meter time-out
U1110 A/C-ECU time-out
ABS-ECU U1073 Bus Off CAN main bus line diagnostics
ABS/TCL-ECU U1073 Bus Off CAN main bus line diagnostics
U1100 Powertrain control module time-out (related to engine) < vehicles with TCL >
U1101 Powertrain control module time-out (related to automatic transmission) < vehicles with TCL >
U1120 Failure information on powertrain control module (related to engine) < vehicles with TCL > Diagnose CAN main bus lines and confirm input signals.
Combination meter U1073 Bus Off CAN main bus line diagnostics
U1100 Power train control module time-out (related to engine)
U1101 Power train control module time-out (related to A/T)
U1102 ABS-ECU time-out
U1109 ETACS-ECU time-out
U1120 Failure information on power train control module (related to engine) Diagnose CAN main bus lines and confirm input signals.
Multi-center display unit (middle-grade type or vehicles with Mitsubishi multi communication system) 010 Bus Off CAN main bus line diagnostics
011 Power train control module time-out (related to engine)
012 Power train control module time-out (related to A/T)
013 A/C-ECU time-out
014 Combination meter time-out
019 ETACS-ECU time-out
020 Failure information on power train control module (related to engine) Diagnose CAN main bus lines and confirm input signals.
021 Failure information on combination meter
022 Failure information on A/C-ECU
ETACS-ECU 010 Bus Off CAN main bus line diagnostics
011 Power train control module time-out (related to engine)
012 Power train control module time-out (related to A/T)
013 A/C-ECU time-out
014 Combination meter time-out
015 Multi-center display unit (middle-grade type or vehicles with Mitsubishi multi communication system) time-out
021 Failure information on combination meter Diagnose CAN main bus lines and confirm input signals.
A/C-ECU U1073 Bus Off CAN main bus line diagnostics
U1100 Powertrain control module time-out (related to engine)
U1111 Multi-center display unit (middle-grade type) time-out
U1120 Failure information on powertrain control module (related to engine) Diagnose CAN main bus lines and confirm input signals.
SRS-ECU U1073 Bus Off CAN main bus line diagnostics
TPMS RECEIVER U1073 Bus Off CAN main bus line diagnostics
U1100 Engine CAN timeout
U1101 T/M CAN timeout/Not equipped
U1102 ASC/TCL/ABS timeout/Not equipped
U1103 PDC CAN timeout/Not equipped
U1104 SAS CAN timeout/Not equipped
U1105 YR/G CAN timeout/Not equipped
U1106 EPS CAN timeout/Not equipped
U1107 4WD CAN timeout/Not equipped
U1108 Meter CAN timeout
U1109 ETACS CAN timeout
U1110 A/C CAN timeout/Not equipped
U1111 Display CAN timeout/Not equipped
U1112 SRS-ABG CAN timeout/Not equipped
U1113 Display CAN timeout/Not equipped
U1114 TPMS CAN timeout/Not equipped
U1116 KOS.CAN timeout/Not equipped
U1117 IMMOB.CAN timeout/Not equipped
TPMS RECEIVER U1120 Engine (CAN message) Diagnose CAN main bus lines and confirm input signals.
U1121 T/M (CAN message)
U1122 ASC/EPS/TCL/ABS (CAN message)
U1123 PDC (CAN message)
U1124 SAS (CAN message)
U1125 Yaw rate/G sensor (CAN message)
U1126 EPS (CAN message)
U1127 4WD (CAN message)
U1128 Meter (CAN message)
U1129 ETACS (CAN message)
U1130 A/C (CAN message)
U1131 Display (CAN message)
U1132 SRS airbag (CAN message)
U1133 Display (CAN message)
U1136 KOS (CAN message)
U1190 No receive fault detect signal
U1200 SAS parity error
U1201 Yaw rate sensor parity error
U1202 Straight G sensor parity error
U1203 Lateral G sensor parity error
U1204 SAS message counter error
U1205 Yaw rate/G message counter error
U1206 Sleep instruction flag invalid