LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Galant ES >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> L << Steering Gear Rack Support Cover/Steering Gear Inner Nut (Jam Nut) Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> L << Steering Gear Rack Support Cover/Steering Gear Inner Nut (Jam Nut) Installation

  1. Position the rack at its center.
  2. Apply 3M™ AAD Part number 8661, 8663, 8672, 8678, 8679 or equivalent to the threaded part of the rack support cover.
  3. Use special tool MB991204 to tighten the rack support cover to 12 +/- 2 N.m (107 +/- 17 in-lb).
  4. Turn the rack support cover 10 degree angle counterclockwise.
  5. Use special tool MB991204 to hold the rack support cover, and then tighten the jam nut to 59 +/- 10 N.m (44 +/- 7 ft-lb).
    Fig 1: Installing Steering Gear Rack Support Cover/Steering Gear Inner Nut (Jam Nut)
    G04255576Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals