Symptom Chart
WARNING: This page is about a different variant/trim than selected.
SYMPTOM CHART
| SYMPTOM | INSPECTION PROCEDURE NO. | |
|---|---|---|
| Communication with scan tool is not possible | Communication with all systems is impossible | INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) for 2.4L or INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) for 3.8L . |
| Communication with the ABS/TCL-ECU only is impossible | INSPECTION PROCEDURE 1: COMMUNICATION BETWEEN SCAN TOOL AND THE ABS-ECU IS NOT POSSIBLE. . | |
| When the ignition switch is turned to the "ON" position (engine stopped), the "TCL OFF" indicator light does not illuminate. | 1 | |
| When the ignition switch is turned to the "ON" position (engine stopped), the TCL work indicator light does not illuminate. | 2 | |
| The "TCL OFF" indicator light remains illuminated after the engine is started. | 3 | |
| The TCL work indicator light remains illuminated after the engine is started. | 4 | |
| When the TCL switch is push on, TCL does not be cancelled. | 5 | |
| TCL does not operate. | 6 | |