Transfer Oil (Check Oil Level And Condition/Change): Notes

Remove the filler plug and gasket.
Check that the oil level is just below the lower edge of the filler plug hole.
Check that the oil is not excessively foul and has moderate viscosity.
Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb)

Fig 1: Identifying Filler Plug And Drain Plug
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Checking That Oil Level Is Just Below Lower Edge Of Filler Plug Hole
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.