General Information
- How To Use This Data
- Troubleshooting Guidelines
- How To Use Troubleshooting/Inspection Service Points
- Troubleshooting Contents
- Notes
- Standard Flow Of Diagnostic Troubleshooting
- System Operation And Symptom Verification Tests
- Diagnostic Function
- Diagnostic Trouble Code Table
- Symptom Table
- Diagnostic Trouble Code Procedures
- Symptom Procedures
- Service Data Reference Table
- Check At Ecu Terminals
- Inspection Procedures Using An Oscilloscope
- How To Use The Inspection Procedures
- Connector Measurement Service Points
- Connector Inspection Service Points
- How To Cope With Intermittent Malfunctions
- How To Treat Past Trouble
- Inspection Service Points For A Blown Fuse
- Troubleshooting Contents
- Vehicle Identification
- Precautions Before Service
- Cautions For Working In Engine Compartment
- Supplemental Restraint System (SRS)
- Scan Tool (Multi Use Tester (M.U.T.-III) Sub Assembly)
- How To Perform Vehicle Identification Number (VIN) Writing
- Coding List
- Initialization Procedure For Learning Value In MFI Engine
- Engine Idling Learning Procedure
- Servicing Electrical System
- How To Shift Lock Forced Release
- Vehicle Washing
- Application Of Anti-Corrosion Agents And Undercoats
- Form- In- Place Gasket (FIPG)
- Towing And Hoisting
- General Data And Specifications
- Tightening Torque
- Lubrication And Maintenance
- Recommended Lubricants And Lubricant Capacities Table
- Scheduled Maintenance Table
- Maintenance Service
- Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
- Fuel Hoses (Check Condition)
- Air Cleaner Element (Replace)
- Evaporative Emission Control System (Except Evaporative Emission Canister) (Check For Leaks And Clogging)
- Spark Plugs (Replace)
- Intake And Exhaust Valve Clearance (Inspect And Adjust)
- Timing Belt (Replace)
- Drive Belt (For Generator, Power Steering Oil Pump) (Check Condition)
- Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
- Engine Oil (Change)
- Engine Oil Filter (Replace)
- Transmission Fluid (CVT Fluid) (Check Fluid Level And Condition/Change)
- Transfer Oil (Check Oil Level And Condition/Change)
- Engine Coolant (Change)
- Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
- Disc Brake Pads, Rotors (Inspect For Wear)
- Brake Hoses (Check For Deterioration Or Leaks)
- Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
- Drive Shaft Boots (Inspect For Grease Leaks And Damage)
- Suspension System (Inspect For Looseness And Damage)
- Rear Axle Oil (Check Oil Level)
- Tires (Rotate)
- Air Filter (Replace)
- Main Sealant And Adhesive Table